User`s guide

INSTALLATION OF THE PROFESSIONAL MESSAGE MODEM WITH WINDOWS 3.X
32
The phone jack you use must be for an
ANALOGUE phone line. Most office phones are
wired through DIGITAL lines. Be sure you know
which type of line you have. The modem will be
damaged if you use a digital phone line.
4. Plug the power adaptor that came with the
modem into a standard wall jack and insert its
plug into the power jack on the modem.
5. If you wish to use your modem and phone
through the same phone wall jack, plug your
phone's cord into the modem's PHONE jack.
Use an adaptor cable if necessary.
6. Plug the power cords, cables, and peripherals
back into the computer and turn on the
computer.
7. Start Windows 3.x.
Be sure to install software after the modem is
installed.
Turn to “Software Installation” on page 33 for
information about installing communications
software.
Congratulations!