User`s guide

INSTALLATION OF THE PROFESSIONAL MESSAGE MODEM WITH WINDOWS 95
20
Write down your version of Windows.
Windows 95 version __________
Click OK.
How to Connect the Modem
to the Computer
1. Turn off your computer and any attached
devices, such as a printer, monitor, keyboard,
and mouse.
2. Connect the serial cable to the modem and to the
computer. When looking for your serial port on
the back of your computer, look for ports labeled
COM, MODEM, RS-232, or SERIAL. Do not
select AUX, GAME, LPT, or PARALLEL.
Remember which serial port you selected. This
information will be necessary when installing
your communications software.
3. Plug one end of the phone cord into the TELCO
jack and the other end into a phone wall jack.
The phone jack you use must be for an
ANALOGUE phone line. Most office phones are
wired through DIGITAL lines. Be sure you know
which type of line you have. The modem will be
damaged if you use a digital phone line.
4. Plug the power adaptor that came with the
modem into a standard wall jack and insert its
plug into the power jack on the modem.
5. If you wish to use your modem and phone
through the same phone wall jack, plug your
phone's cord into the modem's PHONE jack.
Use an adaptor cable if necessary.