User`s guide

PRODUCT FEATURES
14
at any time by changing the predefined
number through the software application.
The Independent mode fax forwarding
feature is controlled through the software
application or remotely.
1) Setup Independent Fax mode
Set the phone number in the application
(number is stored in the flash memory of
the modem) and then enable/disable
using the applicable button.
2) Fax forwarding dial up control
(remote control is limited only to the
enable/disable feature as follows)
a) Enter your password and from the
Main menu, press ÄÄ to toggle the
enable/disable fax forwarding feature.
b) Confirmation of the
enabling/disabling of this feature will be
indicated by playing an opening/closing
tone.
Manual Reception of a Fax Call
A call answered with the handset or speakerphone
button, which turns out to be a fax, will not be
aborted, if you press the STOP/PLAY button for
2 SECONDS. This allows the modem to
automatically receive the incoming fax.
Caller ID Feature
The Caller ID feature discloses the identification of
the caller prior to answering the call. You can
enable/disable this feature through the software
application, where a window is provided to reveal
the caller. (Caller ID service may have to be
purchased separately from your telephone
company.)
Toll Saver Feature
The Professional Message Modem is generally set to
answer after a certain number of rings (usually 3 to
6). With the toll saver feature enabled, the modem
will detect new voice messages in memory and
answer with 2 rings less than the preset number of
rings. If there are no new messages or the toll saver
feature is disabled, the modem will answer after the
preset number of rings.