User`s guide

SPECIAL NOTES - AUSTRALIAN USERS

Australian

Safety Instructions

(Internal Modems Only)

• • The modem card must only be used in data

terminal equipment (DTE), e.g., computer, that has

a screw down cover/lid. As unsafe voltages (TNV)

exist on the modem card, disconnect the modem

card from the telephone line while the cover (lid) of

the DTE (computer) is removed.

• • Installation of the modem card in a DTE

(computer) which does not require a tool to open

the cover (lid), will render the product approval

permit void.

• • During installation of the modem card, care must

be taken. There should be at least 2mm of air gap

between the modem card and other components

within the DTE (computer) in which the

modem card is installed.

• • Please attach the label provided with the modem

card to your DTE (computer). The label reads:

Disconnect the telephone line before opening the

cover (lid) of the DTE (computer). Do not

connect the customer equipment (modem) to the

telephone line, while the cover (lid) of the

DTE (computer) is open