User`s guide
User’s Guide 65
Register Default Function
S38 0 Sets an optional delay, in seconds, before a forced
hang-up and clearing of the Transmit buffer when DTR
drops during an ARQ call. This allows time for a
remote modem to acknowledge receipt of all
transmitted data before it is disconnected. The
modem immediately hangs up when DTR drops.
This option only applies to connections terminated by
dropping DTR. If the modem receives the ATH
command, it ignores S38 and immediately hangs up.
S39-S40 0 Reserved
S41 0 Reserved
S42 0 Reserved
S43 112 Autonomous 8-bit S-Register. Bit mapped register
stored in NVRAM.
Bit Value Result
0 1 56K Message Modem
disabled.
1 2 Dialup Retrieval disabled.
2 4 N/A
3 8 Monitor disable.
4 16 Fax Reception and Storage
enabled.
5 32 Voice Reception and Storage
enabled.
6 64 (High) Answer in SR Mode
after four RINGs.
7 128 (Low) Answer in SR Mode
after four RINGs.