User`s guide

User’s Guide 59

S8 2 Sets the duration, in seconds, for the pause (,) option

in the Dial command.

S9 6 Sets the required duration, in tenths of a second, of

the remote modem’s carrier signal before recognition

by the modem.

S10 7 Sets the duration, in tenths of a second, that the

modem waits to hang up after loss of carrier. This

guard time allows the modem to distinguish between

a line disturbance from a true disconnect (hang up)

by the remote modem.

NOTE: If you set S10 = 255, the modem will not

hang up when carrier is lost. Dropping DTR hangs

up the modem.

S11 70 Sets the duration and spacing, in milliseconds, for

tone dialling.

S12 50 Sets the duration, in fiftieths of a second, of the

guard time for the escape code sequence (+++).