User`s guide

56 56K Message Modem
&Un Sets floor connect speed when &Un is set above 0.
If the connection cannot be established above this
speed, the modem will hang up. When &Un is used
in conjunction with &Nn and &Nn is greater than 0,
&Nn is the ceiling connect speed..
&N=0 &N>0
&U=0 Connects at best Connects at speed
possible speed defined by &Nn. If
connection cannot be established at this speed, the
modem will hang up.
with the remote modem.
Note: The factory default settings of &N and &U should be
sufficient for most users.
&U>0 Connects at fastest speed possible above the value of
&Un. Connects at fastest speed possible between
&Nn. and &Un
&U0 No restrictions on the minimum speed of the connection
&U1 300 bps
&U2 1200 bps
&U3 2400 bps
&U4 4800 bps
&U5 7200 bps
&U6 9600 bps
&U7 12,000 bps
&U8 14,400 bps
&U9 16,800 bps
&U10 19,200 bps
&U11 21,600 bps
&U12 24,000 bps
&U13 26,400 bps
&U14 28,800 bps
&U15 31,200 bps
&U16 33,600 bps
&U17 28000 bps
&U18 29333 bps
&U19 30666 bps
&U20 32000 bps
&U21 33,333 bps
&U22 34666 bps
&U23 36000 bps
&U24 37,333 bps
&U25 38666 bps
&U26 40000 bps
&U27 41,333 bps
&U28 42,666 bps
&U29 44,000 bps
&U30 45,333 bps
&U31 46666 bps
&U32 48000 bps
&U33 49333 bps
&U34 50666 bps
&U35 52000 bps
&U36 53333 bps
&U37 54666 bps
&U38 56000 bps
&U39 57333 bps