User`s guide

48 56K Message Modem
Basic Data Commands
<control key>S Stop or restart help screens
<control key>C or
<control key>K Stop help screens
$ Use in conjunction with D, S, or & commands (or just
AT) to display a basic command list; online help.
A Manual Answer: goes off hook in answer mode.
Pressing any key aborts the operations.
A/ Re-executes the last issued command. Used mainly to
redial. This does not require the AT prefix or a Carriage
Return.
A> Re-executes the last issued command continuously,
until the user intervenes or the command is executed.
Does not require the AT prefix or a Carriage Return.
Any key Aborts off-hook dial/answer operation and hangs up.
AT Required command prefix, except with A/ and +++, and
A. Use alone to test for OK result code.
Bn U.S./ITU-T answer sequence.
B0 ITU-T answer sequence
B1 U.S. answer tone
Dn Dials the specified phone number. Includes the
following:
0-9 Numeric digits
#,* Extended touchtone pad tones
L Dials the last dialled number.
P Pulse (rotary) dial
R Originates call using answer (reverse)
frequencies.
Sn Dials the phone number string stored in
NVRAM at position n (n = 0−3). Phone
numbers are stored with the &Zn=s command.
T Tone dial