User`s guide

46 56K Message Modem
SD Send Data Flashes when computer sends a data bit to
modem.
TR Data Terminal Ready ON if modem receives a DTR signal
from computer. Always ON (modem ignores
DTR) if the DTR override is ON (&D0).
CS Clear to Send ON until modem lowers CTR when transmit
data hardware flow control is enabled
(&H1, &H3).
MSG New Message Blinks red once for each new fax message.
Blinks green once for each new voice
message.
Solid amber indicates that you have
retrieved your messages, but that they have
not been deleted from memory.
FAX.. Fax Operations....... Data Mode: Automatic Repeat Request. ON
if modem is set to &M4 or &M5 and
successfully establishes an error control
connection. Flashes when modem
retransmits data to remote modem.
......... ............................... Fax Mode: Flashes to indicate fax mode.
......... ............................... 56K Message Modem: Dual color LED with
green indicating 56K Message Modem is
enabled and red indicating it is off. Solid
green indicates no new messages. Each
new message will be indicated by a single
slow blink. Fast blinking indicates that the
flash memory is full.
OH.... Off Hook................. ON when modem accesses the phone line.
OFF when modem is On Hook.