User`s guide
32 56K Message Modem
Online Help Resources
Connecting to the 3Com BBS
To connect to the 3Com Bulletin Board System, follow these steps:
1. Start your communications software. The software settings for
the BBS are as follows:
ANSI terminal emulation
Data Bits: 8
Parity: None
Stop Bits: 1
2. Put your computer in Terminal mode. Enter the following
command:
ATDT 01189692200<Enter>
3. If this is your first time connecting to our BBS, you will be asked
to enter your name and a password, as well as fill out a
questionnaire.
4. When you finish registering, press enter with each prompt until
you come to the main menu. Select the appropriate letter to
perform the desired function.