User`s guide

18 56K Message Modem
8. Next, click the Diagnostics tab at the top of the “Modems
Properties” screen. Write down the COM port number for your
modem. You will need to know this setting when you install
your communications software.
9. Click OK.
If You Have Windows 95 Version 950b:
1. When Windows restarts, it should detect the modem, and you
should see a screen like the one below.
Insert the driver disk into your disk drive and click Next.
Note: If this screen does not appear, go to “If Plug and Play Does
Not Detect Your Modem”.
2. When you see the following screen, click Finish.