User`s guide

User’s Guide 9
1) Setup Independent Fax mode
Set the phone number in the application (number is stored in
the flash memory of the modem) and then enable/disable
using the applicable button.
2) Fax forwarding dial up control
(remote control is limited only to the enable/disable feature as
follows)
a) Enter your password and from the Main menu, press ÄÄ
to toggle the enable/disable fax forwarding feature.
b) Confirmation of the enabling/disabling of this feature
will be indicated by playing an opening/closing tone.
Caller ID Feature (applies in the UK only)
The Caller ID feature discloses the identification of the caller
prior to answering the call. You can enable/disable this feature
through the software application and are then able to view the
calling telephone number from within a dialing window.
Messages retrieved from Independent mode will be stored with
identification within the software mailbox.
Caller ID must be subscribed from your telephone provider and
needs to be compatible with the British Telecom Caller ID
systems before this feature can be utilised.
#CID=n Controls Caller ID feature
#CID=0 Caller ID disabled
#CID=1 Caller ID enabled with formatted information
#CID=2 Caller ID enabled with unformatted information