User`s guide

56K Professional Message Modem64
&U
n
Sets floor connect speed when set above 0. If the
connection cannot be established above this speed, the
modem will hang up. When &U
n
is used in conjunction
with &N
n
and &N
n
is greater than 0, &N
n
is the ceiling
connect speed
&N=0 &N>0
&U=0
Connects at Connects at
best possible speed defined by
speed between &N
n
. If the connection
your modem and cannot be made
the remote modem. at this speed,
NOTE: These the modem will
factory default hang up.
settings should
be sufficient for
most users.
&U>0
Connects at any Connects at any
speed faster than speed between &N
n
and &U
n
.
the value of &U
n
&U0 No restrictions on the minimum speed for the
connection
&U1 300 bps
&U2 1200 bps
&U3 2400 bps
&U4 4800 bps
&U5 7200 bps
&U6 9600 bps
&U7 12,000 bps
&U8 14,400 bps
&U9 16,800 bps
&U10 19,200 bps
&U11 21,600 bps
&U12 24,000 bps
&U13 26,400 bps
&U14 28,800 bps
&U15 31,200 bps
&U16 33,600 bps
&U17 28000 bps
&U18 29333 bps
&U19 30666 bps