User`s guide

56K Professional Message Modem 55

Required command prefix, except with A/, +++, and A>. Use

alone to test for OK result code.

U.S./ITU-T answer sequence

B0 ITU-T answer sequence

B1 U.S. answer tone

Dials the specified phone number, includes the following:

0-9 Numeric digits

#, * Extended touch-tone pad tones

L Dials the last dialed number

P Pulse (rotary) dial

R Originates call using answer (reverse) frequencies

Sn Dials the phone number string stored in NVRAM at

position n (n = 0−3). Phone numbers are stored with

the &Zn=s command

T Tone dial

, (Comma) Pause, see S8 definition; which it is linked to

; (Semicolon) Return to Command mode after dialling

! (Exclamation Point) Flashes the switch hook

/ (Forward Slash) Delays for 125 ms. before proceeding

with dial string

W Wait for second dial tone (X2 or X4); linked to S6

@ Dials, waits for quiet answer and continues (X3 or

higher)

$ Displays a list of Dial commands

Sets local echo

E0 Echo OFF

E1 Modem displays keyboard commands

Sets online local echo of transmitted data ON/OFF

F0 Local echo ON--modem sends a copy of data it sends

to the remote system to your screen.

F1 Local echo OFF--receiving system may send a remote

echo of data it receives.