User`s guide

56K Professional Message Modem54

Typing

Commands

• Type commands in either upper or lower case, not a combination.

Use the Backspace key to delete errors. (You cannot delete the

original AT command, since it is stored in the modem buffer.)

• If a command has numeric options and you do not include a

number, zero is assumed. For example, if you type ATB, the

command ATB0 is assumed.

• Every command except A/, A>, and +++ must begin with the AT

prefix and be entered by pressing

ENTER

• The maximum command length is 58 characters. This does not

include the AT prefix, carriage returns, or spaces.

NOTE:

All defaults are based on the &F1, the Hardware Flow

Control template loaded in NVRAM when the modem is shipped.

Defaults are listed in

italics

Basic Data Commands

<control key>S

Stop or restart help screens.

<control key>C

<control key>K

Stop help screens.

Use in conjunction with

, or

commands (or just AT) to

display a basic command list; online help.

Manual Answer: goes off hook in answer mode. Pressing any

key aborts the operations.

Re-executes the last issued command. Used mainly to redial.

This does not require the AT prefix or a Carriage Return.

Re-executes the last issued command continually, until the

user intervenes or the command is executed. Does not require

the AT prefix or a Carriage Return.

Any key

Aborts off-hook dial/answer operation and hangs up.