User`s guide

56K Professional Message Modem28
Installing / Using Non-Supplied
Software
Your modem has been designed and tested using a wide range of
communications software packages on the market. You may need to
know the following information when installing communications software
packages.
Type of Modem
Most communications software programs will ask you to select the type
of modem you are using. Select a 3Com U.S. Robotics high speed
modem. If that selection is not listed, pick Courier Dual Standard, V.34,
or V.32bis..
KEY POINT: Refer to the manual that came with your software
for its installation instructions. The software’s installation program
will ask you questions about the modem you are using.
Initialization String
For hardware flow control, a fixed serial port rate, and full result codes
and the PMM answer machine feature disabled (PWR/MEM LED=red),
type:
AT&F1+MCA=0 and then press ENTER.
If you must use software flow control, type:
AT&F2+MCA=0 and then press ENTER.