User`s guide

56K Professional Message Modem 25
5. In the “Modems Properties” screen, you should see your modem
listed.
This means the installation was a success.
NOTE: If you do not see your modem listed in the preceding
screen, the Plug and Play installation was unsuccessful. Please
refer to the “When Plug and Play Fails” section on page 34.
6. Next, click the Diagnostics tab at the top of the “Modems
Properties” screen. Write down the COM setting for your modem.
You will need to know this setting when you install your fax/data
communications software.
Click OK.
Congratulations!
You are now ready to start using your
Professional Message Modem.