User`s guide

56K Professional Message Modem 13
Independent Mode Facsimile (Fax) Forwarding
Faxes can be forwarded to a predefined phone number. The faxes
will continue to be forwarded until the feature is disabled. The faxes
can be redirected to a different number at any time by changing the
predefined number through the software application. The
Independent mode fax forwarding feature is controlled through the
software application or remotely.
1) Setup Independent Fax mode
Set the phone number in the application (number is stored in the
flash memory of the modem) and then enable/disable using the
applicable button.
2) Fax forwarding dial up control
(remote control is limited only to the enable/disable feature as
follows)
a) Enter your password and from the Main menu, press
ÄÄ to toggle the enable/disable fax forwarding
feature.
b) Confirmation of the enabling/disabling of this feature
will be indicated by playing an opening/closing
tone.
Caller ID Feature
The Caller ID feature discloses the identification of the caller prior to
answering the call. You can enable/disable this feature through the
software application and are then able to view the calling telephone
number from within a dialing window. Messages retrieved from
Independent mode will be stored with identification within the
software mailbox.
Caller ID must be subscribed from your telephone provider and
needs to be compatible with the British Telecom Caller ID systems
before this feature can be utilised.
#CID=n Controls Caller ID feature