Operating instructions

5-12 LIFEPAK 500 Automated External Defibrillator Operating Instructions
Maintenance
ELECTRODE STORAGE
For information about defibrillation electrode storage, refer to the operating instructions for the
FAST-PATCH and QUIK-COMBO electrodes.
SERVICE AND REPAIR
If the LIFEPAK 500 AED requires service as indicated by testing, troubleshooting, or the service
indicator, contact authorized service personnel. In the US, call Medtronic Physio-Control Technical
Support at 1.800.442.1142. When you call Medtronic Physio-Control to request service, provide the
following information:
• Model number and part number
• Serial number
• Observation of the problem that led to the call
If the device must be shipped to a service center or the factory, pack the device in the original shipping
container. If this is not possible, ship the device in protective packing to prevent shipping damage.
The
LIFEPAK 500 AED Service Manual provides detailed technical information to support service and
repair by authorized service personnel.
Product Recycling Information
Recycle the device at the end of its useful life.
• Recycling Assistance
The device should be recycled according to national and local regulations. Contact your local
Medtronic Physio-Control representative for assistance.
• Preparation
The device should be clean and contaminant-free prior to being recycled.
• Recycling of Disposable Electrodes
After disposable electrodes are used, follow your local clinical procedures for recycling.
• Packaging
Packaging should be recycled according to national and local regulations.
WARRANTY
Refer to the product warranty statement included in the accessory kit shipped with the product. For
duplicate copies, contact your local Medtronic Physio-Control representative. In the USA, call
1.800.442.1142.
WARNING!
Shock hazard.
Do not disassemble the defibrillator. It contains no operator serviceable components and dangerous
high voltages may be present. Contact authorized service personnel for repair.