Operating instructions

4-4 LIFEPAK 500 Automated External Defibrillator Operating Instructions
Data Management
Overview of Data Retrieval
There are three ways you can retrieve data from the LIFEPAK 500 AED:
Send the data to a computer by modem.
Send the data to a computer by direct connection.
Send the data to a printer.
The AED does not delete data after it is transferred. Data is only deleted when new patient records are
created. Table 4-1 describes the stored data and how you can retrieve it.
Table 4-1 LIFEPAK 500 AED Data and Retrieval
SENDING DATA TO A COMPUTER BY MODEM
These paragraphs describe the resources, equipment connections, and procedures required to send
LIFEPAK 500 AED data to a computer by modem.
Required Resources
Table 4-2 summarizes the resources required to send data to a computer by modem.
Table 4-2 Required Resources for Sending Data to a Computer by Modem
Type of Data Retrieval Modem Computer Printer
Event Log Data Yes Yes Yes
CODE SUMMARY data Yes Yes Yes
Continuous ECG
1
Yes Yes No
Audio Recording
1
Yes
2
Yes
2
No
Test Log Yes Yes Yes
1
Available for the Current Patient only.
2
To play the audio recordings, a sound card, sound card software, and the QUIK-VIEW 500 data review program or
CODE-STAT Suite must be installed in the computer.
Description
Required Resources at Local Site
Modem Cable (for use with LIFEPAK 500 AED)
Modem that supports the TIA/EIA-602 command set
Modem power cord or power adapter (if required)
Telephone cord (with RJ11 connectors)
Analog telephone line
*