Operating instructions

2-2 LIFEPAK 500 Automated External Defibrillator Operating Instructions
Getting Ready
UNPACKING AND INITIAL INSPECTION
Remove the LIFEPAK 500 AED from the shipping container. Examine the AED and accessories for any
sign of damage during shipping. Make sure that all the required supplies and accessories, including
electrodes and batteries, are present. Save the shipping container and foam inserts for use in
reshipping the AED.
CONTROLS, INDICATORS, AND CONNECTORS
Figure 2-1 and Table 2-1 provide an overview of the LIFEPAK 500 AED controls, indicators, and
connectors. Figure 2-2 and Table 2-2 provide an overview of the accessories.
Figure 2-1 LIFEPAK 500 AED controls, indicators, and connectors
Table 2-1 Controls, Indicators, and Connectors
1
Green ON/OFF button turns the power on or off. The LED is lit
whenever the AED is on.
2 Yellow ANALYZE button initiates analysis of the patient's ECG rhythm
when pressed. The LED is lit while the AED analyzes the rhythm. The
LED flashes to prompt the operator to press
ANALYZE.
Note: Does not apply to LIFEPAK 500 AEDs that do not have
an
ANALYZE button. In this case, the ANALYZE button is replaced
by a blank
MENU button, and analysis occurs automatically.
O
K
1
2
3
4
5
6
7
8
9
10
11
12
13
14