User manual

CONNECTING TO THE SPOTCELL CU

6 SpotCell Viewer 2

To setup a connection using a wireline modem

Although other modems may work, the wireline modem currently approved for use with

SpotCell systems is the USRobotics USR325686E 56K V.92 External Faxmodem.

Check the support page of the Spotwave Wireless web site (www.spotwave.com) for an

up-to-date list of approved wireline modems.

1. Ensure the modem and CU are powered off.

2. Connect the modem and CU using an RJ-45 cable (max 50 ft.) and the provided RJ-

45 to DB25 serial adapter.

3. Before connecting power to the modem, set the DIP switches on the back of the

modem as shown in the following table.

4. Connect power to the modem first and then the CU.

The CU will automatically detect and configure the modem.

5. Connect the second modem to the PC.

6. Start SpotCell Viewer by clicking:

Start > Programs > SpotCell Viewer > SpotCell Viewer 2.4

Go to the Connection tab and ensure that the correct Comm port

is selected.

8. Click Modem Terminal.

9. Configure the modem by typing in the following command string.

For wireline modems type

AT E1 Q0 Y0 S0=1 &B1 &D0 &H0 &I0 &K0 &M4 &N6 &U6 &R1 &W0

For wireless modems type

AT+IPR=57600

ATE0

AT$QCVAD=4

AT+DS=0,0

ATS0=1

The SpotCell system is now ready for remote Viewer access and troubleshooting.

12345678

↓ ↑ ↓ ↓ ↑ ↑ ↑ ↓