User manual

USING SPOTCELL VIEWER
18 SpotCell Viewer 2
5.4 The Configure tab
The Configure tab is only available when connected to the SpotCell 163 or SpotCell 263
product. The Configure tab is used to view or modify the prefered channels and to force
the system to use the preferred channels for scanning.
To program the preferred channels
1.
On the Configure tab, click Modify.
2. Set the preffered channels, and click OK.
To use preferred channels for scanning
 On the Configure tab, select the Enable Exclusive Channel List check box.
5.5 The Active Band tab
The Active Band tab is only available when connected to SpotCell systems designed for
the PCS band (SpotCell 111/112, SpotCell 211/212, or SpotCell 141/142) . The Active
Band tab is used to set the start and stop frequency of the SpotCell device.
To set the start and stop frequencies
1.
On the Active Band tab, enter the Band Start or Band Stop Frequency.
The bandwidth is fixed, so adjusting either frequency will affect both values.
2. Click Set Frequency.
3. Type your username and pasword to authenticate the frequency change and click
OK.