Manualshelf

User manual

ManualsBrandsUS Robotics ManualsOther56K FAXMODEM USB - FOR WINDOWS REV 1.1
11121314151617181920
INSTALL & ACTIVE MODE SYSTEM DISPLAYS
10 SpotCell Viewer 2
4.2 SpotCell Viewer - Active Mode
The SpotCell Viewer main window for a SpotCell in Active Mode is shown below. Key
differences from the Install Window are:
System Mode displays Active (bold) instead of Install (greyed out).
Donor Unit LED information is inactive when the unit is in Active mode.
Adaptive System Gains parameters are active
Uplink displays the current gain of the uplink in dB.
Downlink displays the current gain of the downlink in dB.
Isolation Back-Off displays the reduction in output (from rated 0dBm carrier @
downlink) required to prevent oscillation associated with the available isolation
between the Coverage and Donor Units.