User manual
INSTALL & ACTIVE MODE SYSTEM DISPLAYS
8 SpotCell Viewer 2
4 – Install & Active Mode System Displays
Depending on whether the SpotCell system is in Install Mode or Active Mode, one of two
main screens will appear when SpotCell Viewer is started. This section describes the
system information displayed on these screens.
4.1 SpotCell Viewer – Install Mode
4.1.1 System Parameters
System Mode
System mode indicates the SpotCell system is in Install by showing Install text in
bold and greying out
Active Mode text.
Alarm indicates whether an alarm condition currently exists.
Donor Unit LED provides a graphical view of the LED on the Donor Unit.
System Configuration
Product identifies the product that the computer is connected to.
Software Version indicates which software release is installed on the unit.
Band Start Frequency indicates for the SpotCell 111 & SpotCell 112 products the
lowest downlink or forward path frequency of the system. This is pre-
programmed at the factory.
Band Stop Frequency indicates the highest downlink or forward path frequency
of the system. This is pre-programmed at the factory.
Bandwidth indicates the bandwidth of the Coverage Unit.