Product data

USRobotics
Command Reference
Data Command Set - 81
09 36000
0A 37333
0B 38667
0C 40000
0D 41333
0E 42667
0F 44000
10 45333
11 46667
12 48000
13-FF Reserved
V.92 +P and -Q Commands
This section describes the +P (PCM DCE) and -Q commands and parameters
used to control the V.92 Mode operation.
+PCW - Call Waiting Enable
This command controls the operation of the modem in the presence of call
waiting.
Syntax
+PCW=<value>
Defined Values
<value> Decimal number corresponding to the selected operation.
0 Request modem-on-hold if enabled by +PMH and collect caller ID
information if enabled by +VRID. Toggle V.24 circuit 125.
(Default.)
1 Hang-up.
2 Ignore call waiting.
Result Codes
OK <value> = 0, 1, or 2.