Product data

USRobotics
Command Reference
Data Command Set - 45
ACTIVE PROFILE:
E1 L1 M1 Q0 T V1 X0 &C1 &D2 &G0 &T0
S00:000 S01:000 S02:043 S03:013 S04:010 S05:008 S06:004
S07:050 S08:004
S10:014 S12:050 S16:000 S18:000 S29:070
STORED PROFILE 0:
E1 L1 M1 Q0 T V1 X4 &C1 &D2 &G0 &T0
S00:000 S02:043 S06:004 S07:050 S08:004 S10:014 S12:050
S18:000 S29:070
OK
&W - Store Current Configuration
This command saves the current (active) configuration (profile), including S-
Parameters, in the Registry. The current configuration is comprised of a list of
storable parameters illustrated in the &V command. These settings are restored to
the active configuration upon receiving an Z command or at power up.
Syntax
&W
Result Code
OK
*B - Display Blacklisted Numbers
This command requests the modem to return a list of blacklisted numbers to the
DTE. The format of the response is shown by the example below. Permanently
forbidden numbers as defined by country requirements will not appear on this list.
If no numbers are blacklisted, only the OK result code is issued.
Example:
NO. - PHONE NUMBER -
------ ------------------------------
1; 4175537660
2; 8288924961
3; 3887278862