Product data

USRobotics
Command Reference
S-Parameters - 94
Default: 10 (Line Feed)
S5 - Command Line Editing Character
S5 s sets the decimal value of the character recognized by the modem as a
request to delete from the command line the immediately preceding character.
The modem will not recognize the Command Line Editing character if it is set to a
value that is greater than 32 ASCII. This character can be used to edit a command
line. When the echo command is enabled, the modem echoes back to the local
DTE the Command Line Editing character, an ASCII space character and a
second Command Line Editing character; this means a total of three characters
are transmitted each time the modem processes the Command Line Editing
character.
Range: 0-32, ASCII decimal
Default: 8 (Backspace)
S6 - Wait Time for Dial Tone Before Blind Dialing, or After "W" Dial Modifier
S6 sets one of two possible parameters:
Sets the length of time, in seconds, that the modem will wait before starting to dial
after going off-hook when blind dialing.
If enabled by country options in the INF file, S6 sets the length of time, in seconds,
that the modem will wait for dial tone when encountering a "W" dial modifier
before returning NO DIAL TONE result code.
The modem always pauses for a minimum of 2 seconds, even if the value of S6 is
less than 2 seconds.
Range: 2-255 seconds
Default: 2
S7 - Wait Time For Carrier After Dial, For Silence, or For Dial Tone
After "W" Dial Modifier
S7 sets one of three possible parameters:
Sets the length of time, in seconds, that the modem will wait for carrier before
hanging up. The timer is started when the modem finishes dialing (originate), or
after the billing delay in answer mode. In originate mode, the timer is reset upon
detection of answer tone if allowed by country restrictions.
Sets the length of time, in seconds, that modem will wait for silence when
encountering the @ dial modifier before continuing with the next dial string
parameter.
If enabled by country options in the INF file, S7 sets the length of time, in seconds,
that the modem will wait for dial tone when encountering a "W" dial modifier