User manual

The WebMux™ Model 480S, 580SG, and 680PG User Guide – Version 7.0.x

Out of Path Installation of WebMux™

Configuration Before WebMux™ Installation

Equipment IP Address

Internet Router (or Firewall) Address 10.1.1.1

Webserver(s) Default Gateway 10.1.1.1

Web Site IP Address 10.1.1.200/255.255.0.0

Configuration After WebMux™ Installation

Question Entry

Host Name

webmux

Domain Name cainetworks.com

NAT, Transparent, or Out-of-Path Out-of-Path

WebMux™ Server LAN Information

Server LAN WebMux™ IP Address 10.1.2.254 (any)

Server LAN WebMux™ IP Address Mask 255.255.0.0

Server LAN WebMux™ farm IP Address 10.1.1.200

Server LAN gateway IP address

(Necessary for WebMux™ SSL termination and for Layer 7 load

balancing. Each server’s default gateway needs to be set to this

IP)

10.1.1.253

Server Configuration

Server IP address No Change

Server NetMask No Change

Server Default Gateway No Change

Server Default Gateway

(if using WebMux™ for SSL Termination or Layer 7 load

balancing)

10.1.1.253

Server add loopback adapter 10.1.1.200

Route Deletion Refer to Appendix 2 10.1.1.200

Administration Setup Information

WebMux™ External Gateway IP address 10.1.1.1

Remake /home/WebMux/conf/passwd Y

Administration HTTP Port Number 24

Secure Administration HTTPS Port Number 35

Is this WebMux™ primary Y

WebMux™ running solo without backup

Reboot?

There is no change to each server’s IP address, netmask and gateway address

(except if using the WebMux

for SSL termination or Layer 7 load balancing.

See next paragraph). There is need to add a loopback adapter to each server,