User manual

The WebMux™ Model 480S, 580SG, and 680PG User Guide – Version 7.0.x

Initial setup change Through Browser

Sometimes users like to change the basic settings for the WebMux™ through

browser interface, for example, when the WebMux™ located in a hosting center

across the country. If one has information about the WebMux™ current basic

settings, one could change those parameters through browser. On the browser,

enter the following URL:

https://webmux_ip:webmux_manage_port/cgi-bin/rec

For example, if your webmux_ip is 192.168.12.1, and your

webmux_manage_port is 24, your URL will be

http://192.168.12.1:24/cgi-bin/rec

The first screen in “rec” (reconfiguration) asks for the superuser’s password. The

default superuser’s password is “superuser”, however, the actual superuser’s

password may had been changed by the system administrator. If you could not

remember the superuser’s password, someone has to go to the keypad to reset

the password. See page 22 for more details.

The next question on the screen asks to set the time in the WebMux™. The

WebMux™ uses its clock to set the cookie for the management browser. When

a WebMux™ manager is logged in for more than 8 hours without activity, the

WebMux™ will log out the user based on the cookie. However, if the clock is off

by more than 8 hours, the manager will not be able to login in to the WebMux™.