User manual

The WebMux™ Model 480S, 580SG, and 680PG User Guide – Version 7.0.x

Main Components

Front View

Toggle Power Switch

This switch toggles power on and off. To power off, the switch must be pressed

and held for 5 seconds.

Reset Button

Press and release the reset button to reset the WebMux™. This process may

take several minutes to complete.

Up Arrow Button, Down Arrow Button

When each button is pressed, the value on the cursor location increases or

decreases. It goes through lower case letters, upper case letters, numbers and

symbols. When the cursor is located at the left most position on the LCD, the up

and down arrow allows the user to select a different item to setup.

Left Arrow Button and Right Arrow Button

When each button is pressed, the cursor moves to the left and right.

Check Mark Button, and Cross Button

Check Mark Button confirms the selection, Cross Button cancels the selection. At

any time when the system is running holding down to the Check Mark Button will

invoke the configuration menu, where you can change IP addresses and other

settings.