User manual

The WebMux™ Model 480S, 580SG, and 680PG User Guide – Version 7.0.x

to change its own weight and announce such change to a remote syslog daemon.

Please see appendix 5 for a sample code and a list of allowed responses.

UDP NTP Time Server IP Address:

Since version 5.4, the WebMux™ can sync its internal clock with any UDP NTP

server. By default it points to a tier 2 NTP server. You can also set it to your

Internet NTP server, or wipe out the entry to not sync to any NTP server.

Reset Stranded TCP Connections:

When a server failed to function, there could be many TCP connections still in

TCP_WAIT state. If this set to “Yes”, when client tries to access the failed server,

the WebMux™ will pretend the server is sending TCP Reset to the client, thus

freeing all the TCP_WAIT state connections. Default setting is “Yes” to conserve

resources.

Reboot:

Changes to “TACACS+ server configuration”, "server gateway address", "server

farm network mask", "WebMux™ http control port", “WebMux™ https control

port” “WebMux diagnostic ports”, “least significant bits”, “forwarding policy”, “front

network verification”, and “persistence timeout” requires a reboot for the new

configuration to take effect. You can use the Reboot button to reboot the

WebMux™ remotely. Reboot button does require confirmation before

proceeding with reboot.