User manual

The WebMux™ Model 480S, 580SG, and 680PG User Guide – Version 7.0.x

management software from any IP address. It is recommended to set this up for

security reasons. If wrong IP addresses are entered, management console login

might not be possible. Use the push button controls on the WebMux™ to clear

the allowed host list. This field is blank by default.

Dialout prefix:

Some phone systems require a prefix for outside phone numbers. If a prefix is

required, enter it here. Leave it blank if a prefix is not required. For most Analog

PBX, this will be “9”. Do not enter anything in here, if modem is not connected.

Pager phone numbers:

This is the pager phone number to be dialed when an abnormal condition occurs.

Enter the number without any special characters or spaces. It should be in the

format of a single long integer. Add 1 and the area code if needed. Do not use

"()" or "-" or blank spaces. Do not enter anything in here, if modem is not

connected.

Server for email notification:

In addition to paging, the WebMux™ can send email notifications. Enter the IP

address of the email server that will forward the notifications. Please note:

Because the WebMux™ does not resolve names, this entry must be an IP

address. Changes to the email server allowing the WebMux™ to relay messages

are necessary.

Addresses for email notification:

Enter the email addresses to be notified. Separate multiple addresses with a

colon. For example: johndoe@anywhere.com:janedoe@anywhere.com

UDP syslog server IP address notification:

The WebMux™ can be configured to send syslog messages to a remote syslogd

server. Enter the syslogd server IP address to use this feature. The syslogd

server must be configured to accept remote UDP syslog connections. The

facility for WebMux™ syslog messages is LOCAL6.

The notification levels of the syslog messages are as follows:

Level Search Key Description

INFO STATS LCD display messages

NOTICE LOGIN Successful browser

logout)

NOTICE SETUP Significant access and

changes to setup and

configuration items.

NOTICE EVENT Same as pager/mail

messages

WARNING LOGIN Unsuccessful browser login