User manual

The WebMux™ Model 480S, 580SG, and 680PG User Guide – Version 7.0.x

What if I made mistake in my configuration?

One can always make changes to the hardware settings by press the Check-

Mark button for three seconds when the statistic screen showing. It will start the

prompt questions which will allow the user to navigate from one prompt to

another by using the up/down button on the left most LCD position. For example,

if you configured the Allowed Hosts wrong and lock yourself out, you can go to

the push buttons and select “Clr Allowed Hosts” option, save changes and reboot,

which will allow all the IP address to access the management console through

browser. You can clear the allowed hosts but not reset the password, or change

one option and not change the others.