User manual

The WebMux™ Model 480S, 580SG, and 680PG User Guide – Version 7.0.x

case passive FTP is one of your server farms. Using port number below 1024

will not need to have this farm.

Discard Changes Made?

User can select Yes at this point, all the changes made will be discarded. By

default the answer is NO, all the changes will be saved to internal solid state

storage. Changes will take effect after next reboot.

The next question will be Reboot Now?

Reboot now?

This is the end of initial configuration. Most of the setup or changes require a

reboot to take effect. Press and hold the center Check-Mark button to make the

WebMux™ reboot. Use the UP arrow button to return to “Discard Changes” and

select “Yes” to exit without change. Press the DOWN arrow or Cross Button to

continue to the Factory Reset option (see Factory Reset below).

After the WebMux™ is rebooted, the statistics of the incoming package, outgoing

package, etc will be displayed on LCD periodically.

Factory Reset:

Pressing the “down” button or the “x” button at the “Reboot Now?” screen will

bring you to the factory reset option. You will see:

This option will clear all current settings and reset the WebMux™ to original

factory settings. Press and hold the check-mark button for at least 20 seconds to

activate the factory reset. The process will take a few minutes and the

WebMux™ will reboot itself.