User manual

The WebMux™ Model 480S, 580SG, and 680PG User Guide – Version 7.0.x

255.0.0.0. The IP address of the WebMux™ interfaces attached to the

Server LAN are 10.1.1.10 and 10.1.1.20.

• The Default Gateway for all the servers is 10.1.1.1.

• Farm 1 IP address is 205.133.156.200.

• Servers 1 and 2 serve Farm 1.

• Farm 2 IP address is 205.133.156.210.

• Servers 2 and 3 serve Farm 2.

• Changes to the servers: change default the gateway to 10.1.1.1, as well

as the IP addresses to the 10.3.1.10/20/30 addresses. If on the server

there is a service attached to the IP address (HTTP/S, FTP, etc), please

make sure the service will run on the new IP address.

NOTE: Although the WebMux™ can work with any IP address range, all server IP addresses

should be Internet non-routable address so that the source address from the Internet does

not conflict with the IP addresses on the Server LAN.

NOTE: If there is a firewall between the WebMux™ and the Internet Router, a rule must be

defined in the firewall to allow the IP address of the WebMux™ interfaces on the Router LAN

in addition to the farm IP address (could be same as the WebMux™ Router LAN IP address)

to communicate out to the Internet on all ports. Since the WebMux™ doing Network Address

Translation of the farm address to a non-routable address, the farm addresses on the

WebMux™ interface must communicate outbound on all ports defined in the farms.