User manual

The WebMux™ Model 480S, 580SG, and 680PG User Guide – Version 7.0.x
Farm 2 IP address is 205.133.156.210. Servers 2 and 3 serve Farm 2.
Changes to the server: change the default gateway to 192.168.199.1, as
well as the IP address to the 192.168.199.xxx address. If on the server
there is a service attached to the IP address (HTTP/S, FTP, etc), please
make sure the service will run on the new IP address.
NOTE: Although the WebMux™ can work with any IP address range, all server IP addresses
should be Internet non-routable address so that the source address from the Internet does not
conflict with the IP addresses on the Server LAN.
NOTE: If there is a firewall between the WebMux™ and the Internet Router, a rule must be
defined in the firewall to allow the IP address of the WebMux™ interface on the Router LAN along
with the farm IP address to communicate out to the Internet on all ports. If you are doing Network
Address Translation of the farm address to a non-routable address, then both the farm address
and the WebMux™ interface address must be translated to communicate outbound on all ports.
Copyright© 1997-2006 CAI Networks, Inc.
11