User guide

- 70 -
Weight:
Scheduling priority weight. Valid integer numbers are between 0 and 100. Changing the
weight to zero will stop the incoming connections while all existing connections continue
until time out or connection is terminated by client and server. Although all numbers from 1
to 100 will allow traffic to go through, using a smaller weight number in each server will
have the best load distributing result.
Running state (see the Add Server section for details):
Active
Favorite Active
Standby
Last Resort Standby
7.8 Add MAP
Use the MAP
TM
feature to create additional IP address/port protocol combinations for the
farm. When using a persistent scheduling method, the same client will also be sent to the
same server no matter which port it accesses within that MAP
TM
.
Click on the radio button next to the farm you want to modify and click on the “add MAP”
button on the left. Or click on the farm IP address and click on the “add addr/port” button in
the modify farm screen.
You will see this screen:
Farm IP and Port:
This displays the current farm you are modifying. These fields are set in the “Add Farm”
screen. Once set, they are not changeable. If they must be changed, delete the farm and then
add a new one.