User guide

- 51 -
Download:
This feature allows the SAVED (not necessarily the active) configuration to be saved at the
Administrative Browser workstation. Be sure you have saved your farm configurations from
the main screen before exporting your configuration to ensure that you are getting your most
recent changes. Click on the Click Here to display the configuration. Choose ’File->Save As’
from the browser menu to save it as a text file. Changes can be made to this file and uploaded
to the WebMux. DO NOT change the first comment line.
Upload:
Upload allows a configuration file that has been saved at the browser workstation to be
uploaded to the WebMux. Enter the full path of the configuration file, or click on Browse to
search for the file. Click Upload to upload the file to the WebMux. This file will
IMMEDIATELY become the saved and active configuration. Upload ALL Settings to
WebMux will actually upload settings including IP addresses, farms, and information you
entered in the Administration Setup. If you want to replace the WebMux with a new unit, you
could save the configuration and upload all settings to the WebMux, so that you do not need
to go through step by step configuration (requires both WebMuxes on the same firmware
revision).
6.5.4 Set Clock
Click this link to go to the “Set the Clock” page. The time and date of the WebMux can then
be set. Please note that the WebMux internally uses GMT time zone, not your local time
zone, per W3C/HTTP protocol. If the time zone is not set correctly, the browser access could
be denied due to “cookie” time out. If the UDP NTP server is set up correctly, there is no
need to set the clock anymore, since the WebMux automatically sets its clock periodically.
Month:
Enter the number of the month, 1 through 12. Leading zeroes are not necessary.
Day of the Month:
Enter the day of the month, 1 through 31.