User guide

- 47 -
ICMP Packet input policy:
Accept: The WebMux will allow all ICMP packets to travel through the WebMux. For CLI
arp commands working properly, this must be accept.
Deny: The WebMux will NOT allow any ICMP packets to travel through the WebMux.
Note During installation, having the ability to PING the other hosts on the networks is
typically useful. When the installation is complete, setting the “ICMP packet policy” to
DENY, is recommended as a security precaution.
6.4.1 Change Password
Name:
Select the login name for which the password is to be changed.
New Password:
Enter the new password. This is the password to which the login will be changed.
New Password Again:
Enter the same password as in the previous box.
Confirm/Cancel:
Click Confirm to execute the change. Click Cancel to return to the previous screen
WITHOUT changing the password.
6.4.2 Change PIN
To protect the WebMux from unauthorized changes from the front LCD panel, a PIN can be
entered here to prevent saving any changes from the front LCD panel. By default, there is no
PIN. You can unset the PIN by submitting blank fields.