User guide

- 9 -
• Multiple Uplink/VLAN Support. Using the command line interface command,
nwconfig, WebMux can be configured for use with Multiple ISPs. You can also use
this command line tool to create multiple server subnets. Please see Appendix L for
details.
• Bond All Interfaces. In combination with 802.1q VLAN and Port Channel or LAG
(Link Aggregation Group) configurations on the switch, you can configure the
WebMux to use its “Internet/rtr” and “Server/svr” ports as a single “bonded”
interface in NAT and Transparent Modes. The traditional front and back networks
will now be dependent on the VLAN configurations on the switch. (Note: Out-of-
Path mode already has both interfaces bonded automatically).
• Client Side SSL Authentication. WebMux can be set up to require Client Side SSL
Authentication to provide another layer of client identification for added security.
Please refer to Appendix N for details.