User manual

TECHNICAL REFERENCE
Extended Data Commands
8-11
Note: &U17 through &U39 apply only to V.90 products.
&U17 28,000 bps
&U18 29,333 bps
&U19 30,666 bps
&U20 32,000 bps
&U21 33,333 bps
&U22 34,666 bps
&U23 36,000 bps
&U24 37,333 bps
&U25 38,666 bps
&U26 40,000 bps
&U27 41,333 bps
&U28 42,666 bps
&U29 44,000 bps
&U30 45,333 bps
&U31 46,666 bps
&U32 48,000 bps
&U33 49,333 bps
&U34 50,666 bps
&U35 52,000 bps
&U36 53,333 bps
&U37 54,666 bps
&U38 56,000 bps
&U39 57,333 bps
&Wn Writes current configuration to NVRAM templates.
&W0 Modifies the NVRAM 0 template (Y0)
&W1 Modifies the NVRAM 1 template (Y1)
&Yn Sets break handling.
&Y0 Destructive, but doesn’t send
break
&Y1 Destructive, expedited
&Y2 Nondestructive, expedited
&Y3 Nondestructive, unexpedited
&Zn=s Writes phone number string s
to NVRAM at position n (n =
0−3).
&Zn=L Writes last executed dial string
to NVRAM at position n (n =
0−3).
&Zn? Displays phone number stored at
position n (n = 0−3).
&ZL? Displays the last executed dial string.
#CID=n Controls Caller ID feature.
#CID=0 Caller ID disabled.
#CID=1 Caller ID enabled with
formatted information.
#CID=2 Caller ID enabled with
unformatted information.
+++ Escapes to online-command mode.