User manual

TECHNICAL REFERENCE
8-34
+FTM=n Transmits data using the modulation specified by n.
(n = 3, 24, 48, 72, 96, 97, 98, 121, 122, 145, or 146)
Note: See the “Screen Messages” table at the end of this section
for an explanation of messages that appear in response
to this command.
+FRM=n Receives data using the modulation specified by n.
(n = 3, 24, 48, 72, 96, 97, 98, 121, 122, 145, or 146)
Note: See the “Screen Messages” table at the end of this section
for an explanation of messages that appear in response
to this command.
+FTH=n Transmits data framed in the HDLC protocol using
the modulation specified by n.
(n = 3, 24, 48, 72, 96, 97, 98, 121, 122, 145, or 146)
Note: See the “Screen Messages” table at the end of this section
for an explanation of messages that appear in response
to this command.
+FRH=n Receives data framed in the HDLC protocol using
the modulation specified by n.
(n = 3, 24, 48, 72, 96, 97, 98, 121, 122, 145, or 146)