User manual

TECHNICAL REFERENCE
8-33
Fax Commands
+FCLASS=n Sets the mode of operation.
FCLASS=0 Data mode
FCLASS=1 Group 3 Facsimile Service Class 1 mode
FCLASS=2.0 Group 3 Facsimile Service Class 2.0 mode
FCLASS? Displays the current FCLASS mode (see descriptions above).
+FCLASS=? Displays the FCLASS mode options (see descriptions above).
+FTS=n Stops the fax transmission. Then the modem waits for a
specified time before OK appears on screen. The pause is set in
10 millisecond intervals. n is the number of 10 millisecond
intervals that pass before OK appears. (n=0-255)
+FRS=n Makes the modem wait for a specified length of silence before
sending OK to the screen. The pause is set in
10 millisecond intervals. n is the number of 10 millisecond
intervals that pass before OK appears. (n=0-255)
Note: This command terminates with OK when either the
specified amount of silence is detected or when the user types
anything (which is ignored).