User manual

TECHNICAL REFERENCE
8-24
Register Default Function
S13 0 Bit-mapped register. Select the bit(s) you want on and set S13 to the total of the
values in the Value column. For example, ATS13 = 17 enables bit 0 (value is
1) and bit 4 (value is 16).
Bit Value Result
0 1 Reset when DTR drops.
1 2 Reset non-MNP transmit buffer from 1.5K to 128
bytes.*
2 4 Set backspace key to delete.
3 8 On DTR signal, autodial the number stored in
NVRAM at position 0.
4 16 At power on/reset, autodial the number stored in
NVRAM at position 0.
5 32 Reserved
6 64 Disable quick retrains.
7 128 Disconnect on escape code.
*
The 1.5K-byte non-ARQ buffer allows data transfer with Xmodem- and Ymodem-type file transfer protocols
without using flow control. The 128-byte option lets remote users with slower modems keep data you’re
sending from scrolling off their screens. When remote users send your computer an XOFF (Ctrl-S) and you
stop transmitting, the data in transit from your modem’s buffer doesn’t exceed the size of their screen. This is
also very helpful in situations when a remote modem/printer application is losing characters.