User manual

SOFTWARE INSTALLATION
2-2
modems; RapidComm Voice is used with
modems with voice functionality.
Once you have installed the Connections
program group, you can install the
RapidComm software. (The Setup Wizard
does not install RapidComm.)
Follow these instructions to install
RapidComm:
1. Start the Connections CD (follow the
instructions in the section “Using
Connections Software” on page 2-1).
2. On the main Connections menu, click
Software.
3. Click the Communications button.
4. Click the RapidComm (if you have a
regular faxmodem) or RapidComm
Voice (if you have a voice faxmodem)
button.
5. Follow the on-screen instructions to
finish the installation.
NOTE: The CD also contains an
electronic user manual for RapidComm
and RapidComm Voice.
Congratulations—you are
now ready to start using your
U.S. Robotics modem!