User manual

TECHNICAL REFERENCE
8-14
&Mn Sets Error Control (ARQ)
for connections at 1200 bps
and higher.
&M0 Normal mode, error control
disabled
&M1 Reserved
&M2 Reserved
&M3 Reserved
&M4 Normal/ARQ
&M5 ARQ mode
&Nn Sets connect speed. If connection
cannot be made at this speed, the
modem will hang up. When used
in conjunction with &Un and
&Un is greater than 0, &Nn sets
the ceiling connect speed. &Un
sets the floor connect speed (see
also the table in the &Un section).
NOTE: &N17 through &N39
apply only to V.90 products.
&N0 Connection speed is
determined by
the remote modem.
&N1 300 bps
&N2 1200 bps
&N3 2400 bps
&N4 4800 bps
&N5 7200 bps
&N6 9600 bps
&N7 12,000 bps
&N8 14,400 bps
&N9 16,800 bps
&N10 19,200 bps
&N11 21,600 bps
&N12 24,000 bps
&N13 26,400 bps
&N14 28,800 bps
&N15 31,200 bps
&N16 33,600 bps
&N17 28,000 bps
&N18 29,333 bps