User manual

TROUBLESHOOTING AND HELP RESOURCES
6-8
requires it. Make sure that Wait for dial tone before dialing is checked to make sure there
is no dialing before the line has been picked up.
Once you are done with this, click OK, then Next as stated above.
Now you will need to add the number of your Service Provider. After you are done,
click Next, and then Finish.
Server Configuration
Under the Dial-Up Networking program group, click once on the Dial-Up account
you just created. Click File and select Properties. The “My Connections” screen
should appear.
Click the Server Types tab. We recommend unchecking the “NetBEUI” and
“IPX/SPX Compatible” boxes if you are connecting to an Internet provider. If you
are connecting to a Remote Access Service (RAS) and will be attaching to a
Microsoft, Novell, or other network, you can leave these selected.
Now click TCP/IP settings. The “TCP/IP Settings” screen should appear. You will
now be required to enter your TCP/IP information. This can be set up in several
different ways: