User manual

TROUBLESHOOTING AND HELP RESOURCES
6-7
Close all your applications and restart the system. You are now finished with the
installation process.
Configuring Dial-Up Networking
You first need to add the Dial-Up Adapter. In most cases this will be added automatically. To
verify that the Dial-Up Adapter is installed, right-click the Network Neighborhood icon,
then click Properties. If you cannot find this icon on your desktop, you can also open up the
Network icon in the Control Panel. Then look in the configuration section for the Dial-Up
Adapter.
If the Dial-Up Adapter is not installed, click Add and then click Adapter. Click
Microsoft and then click Dial-Up Adapter. Click OK.
Next, click Start, point to Programs, and click Accessories. Click Dial-Up
Networking and then double-click Make New Connection.
You are now asked to enter a name for the connection and select the modem you
wish to use. Fill in the name field and select the modem you want to use for
connecting.
After selecting your modem, click Configure. Verify all the modem settings.
Under Connections, make sure the data bits, Parity, and Stop bits are set correctly. This is
usually set to 8, None, and 1 in that order. Only change this if the site you are connecting to