SDS

SDS: ER70S-6 USF
October 1, 2014
Page 2 of 7
CARCINOGENICITY:
MANGANESE is listed by ACGIH as Group A4: Not classifiable as a human carcinogen.
WELDING FUMES (not otherwise specified) are considered to be carcinogenic defined with no further categorization by NIOSH
and IARC.
Package Labeling:
GHS: not applicable
GHS Pictograms: not applicable
PRECAUTIONARY STATEMENTS:
P285 In case of inadequate ventilation wear respiratory protection.
P314 Get medical advice/attention if you feel unwell.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P202 Do not handle until all safety precautions have been read and understood.
P260 Do not breathe dust/fume/gas/mist/vapors/spray.
P501 Dispose of contents/container to waste treatment facility in accordance with local and national regulations.
ADDITIONAL LABELING INFORMATION
As an article the product does not need to be labeled in accordance with EC-directives or respective national laws.
Metals in massive form, alloys, mixtures containing polymers and mixtures containing elastomers do not require a label according
to this Annex (Annex I GHS), if they do not present a hazard to human health by inhalation, ingestion or contact with skin or to the
aquatic environment in the form in which they are placed on the market, although classified as hazardous in accordance with the
criteria of this Annex.
Instead, the supplier shall provide the information to downstream users or distributors by means of the SDS.
Before using this product, contact your doctor to determine if exposure to product or use of this product will aggravate your medical
conditions.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
IMPORTANT: This section covers the materials from which these products are manufactured. The fumes and gases produced
during normal use of these products are covered in Section 8. The chemicals or compounds subject to reporting under Title III, in
Section 313, of the Superfund Amendments and Reauthorization Act (SARA) are marked by the symbol #.
Exposure Limit (mg/m
3
)
INGREDIENTS CAS NUMBER OSHA PEL ACGIH-TLV Percent Ingredients (by weight)
Iron 7439-89-6 10 (as Fe) 5 (as Fe) Balance
Molybdenum 7439-98-7 5 0.5 0.75 max.
Silicon 7440-21-3 5 10 1.50 max.
Copper # 7440-50-8 0.1 (fume) 0.2 (as fume) 0.50 max.
Manganese # 7439-96-5 5 (ceiling) 0.1 2.5 max.
CAS / EINECS NUMBER / HAZARD CLASSIFICATION FOR ABOVE INGREDIENTS IF PRESENT
INGREDIENTS
CAS NUMBER
EINECS NUMBER
Hazard Classification per ECD 67/548/EEC
Iron 7439-89-6 231-096-4 No
Molybdenum 7439-98-7 231-107-2 No
Silicon 7440-21-3 231-130-8 No
Copper # 7440-50-8 231-159-6 No
Manganese # 7439-96-5 231-105-1 No
Exposure limits are subject to change. Contact ACGIH and OSHA for current values. See Section 16 for European Council
Directive 67/548/EEC R-phrases and S-phrases if applicable.